PT. Cheapest Printhead

This Printhead has an advantage over all the previous DX5 models for been able to work with 47v which enable it to print at faster speed for greater production Printer Compatability : Aleph TXB 160S, Mimaki JV33-130 / JV33-160 / JV33-260 / JV5-130 / JV5-130S / JV5-160 / JV5-160S / JV5-250 / JV5-260S / JV5-320 / JV5-320DS / JV5-320S / CJV30-100 / CJV30-130 / CJV30-160 / CJV30-60 / CJV30-BS / TS5-1600 / TPC-1000 This Mimaki JV33/JV5 print head is suitable for the Mimaki solvent printer series. The Mimaki JV33/JV5 print head has a native resolution of 1440dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line. The Mimaki JV33/JV5 print head is either used in 4-colours or 6-colours and has a minimum, variable droplet size of 1,5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for this print head is 8 kHz. It is a new generation print head that allows fast speed, high resolution printing with deco-solvent and mild solvent inks. The Mimaki JV33/JV5 original print head is delivered in a sealed Mimaki package, with the Head ID, but without the Head Memory Board (you can safely re-use the Head Memory Board of the print head you are replacing). Mimaki part number for this print head is M007947. Specifications - Technology: Micro-Piezo - Native resolution: 1440 dpi - Min. Droplet Size: 1,5 pico litre - Max. Droplet Size: 21 pico litre - Tot. Amount of Nozzles: 1440 (8 lines x 180 nozzles) - Firing Frequency: 8 kHz - Ink Compatibility: eco-solvent and mild solvent